quattroowner

iTrader: (5)

Just wondering whether a standard blobeye sti exhaust system will bolt onto the turbo back of a V5 Classic. Got the chance of borrowing one for the Mot retest retest retest !!!

I know there will be a spare hanger but im not to fussed about that.

Turbo is a Vf28.

Currently has a 3 inch straight threw h&s on it at the moment.

Had a look and couldnt get a definitive answer as to yes or no.

Apoolgies if it's obvious to some

SLAB

iTrader: (77)

if the joining flange bit the same yes will fit if your using the whole system will fit but stick out

quattroowner

iTrader: (5)

The joining flange at the turbo? Just everything Turbo back. It's only on for a wee while nd wont be used on the road due to the change of exhaust and the map.

Thanks btw

Infected by sti

iTrader: (6)

As long as you swap all of it from the turbo back it will fit, I believe it's the length on the downpipe that can vary on different models so a complete system will fit, if a classic fits a blob then why not the other way around, im sure there is a difference with the hangers tho, not sure if one faces the opposite way

6VOLT

iTrader: (1)

It's the hanger that sits a few inches before the back box which does not fit. However you have 2 on the box and one around the mid pipe section. It will be secure.

Pearcieboy

I've got a classic pipe on my bugeye. All exept the manifold is off a 99 saloon.

TonyBurns

iTrader: (3)

As said, on the new age STI (with some JDM exceptions) you need the full system from the turbo back to make it fit.

stevo1970

iTrader: (1)

How far will it stick out the back of the car? Enough to look silly or attract attention from the Dibbles?

AS Performance

iTrader: (4)

nothing will stick out if you use the full system off a new-age WRX or STi - just make sure its not a JDM spec t/scroll as no chance of fitting...........

stevo1970

iTrader: (1)

Right then to confirm, If i buy a full STI Prodrive exhaust with PPP sport cat I can fit it to my MY00 with TD04 turbo, after a re map of course?