Urgent help with bcv and green connectors needed please all.
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2013
Location: Yeovil. Somerset
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Urgent help with bcv and green connectors needed please all.
Hi all, need help and im starting to get a little worried.
I only bought my54 wrx wagon 2 months ago and always thought it was a little hesitant coming on boost so I cleaned maf today and thought I'd clean the boost control valve. Did a search and found a how to do. Simple enough I thought. So I disconnect the bcv (mine is a 2 pipe bcv) then get under the dash to find the green connectors to plug them together. I find them already plugged together so they have been like that since I bought the car
As in the how to do, I unplugged them then reconnected turn turned the ignition on (did not start it) but nothing happens, no fan running no clicking nothing. I then disconnected the bcv completely, made up 2 leads and did it off the battery, bcv opens and closes fine, cleaned it and refitted. I then disconnected the green connectors and drove the car. It didn't pull or boost as well as before so I reconnected the green connectors, drove again and the hesitation has gone and the car pulls hard. Im worried that one something somewhere is seriously wrong electrically and also my car may be getting ****ed by being driven with the green ones connected. Also the 2 black connectors, one of the plugs has been cut
Please guys need your help with this as I am starting to worry about what I may have bought.
Thanks
Darren
I only bought my54 wrx wagon 2 months ago and always thought it was a little hesitant coming on boost so I cleaned maf today and thought I'd clean the boost control valve. Did a search and found a how to do. Simple enough I thought. So I disconnect the bcv (mine is a 2 pipe bcv) then get under the dash to find the green connectors to plug them together. I find them already plugged together so they have been like that since I bought the car
As in the how to do, I unplugged them then reconnected turn turned the ignition on (did not start it) but nothing happens, no fan running no clicking nothing. I then disconnected the bcv completely, made up 2 leads and did it off the battery, bcv opens and closes fine, cleaned it and refitted. I then disconnected the green connectors and drove the car. It didn't pull or boost as well as before so I reconnected the green connectors, drove again and the hesitation has gone and the car pulls hard. Im worried that one something somewhere is seriously wrong electrically and also my car may be getting ****ed by being driven with the green ones connected. Also the 2 black connectors, one of the plugs has been cut
Please guys need your help with this as I am starting to worry about what I may have bought.
Thanks
Darren
Last edited by daz031178; 08 June 2013 at 12:12 AM.
Thread
Thread Starter
Forum
Replies
Last Post
robbie1988
Wanted
2
13 September 2015 09:25 AM
Scooby-Doo 2
Wheels And Tyres For Sale
1
09 September 2015 06:51 PM