Can anyone help how do you get the front bumper off a bug eye where are the clips bolts nuts

 

I don't know if it is similar to a classic, but i found it easier to remove the whole bumper including the bumper beam. There are 6 x 17mm bolts in the engine bay, 3 next/under the battery and 3 on the other side under the air filter, you can't miss them.
The hard part is finding all the plastic trim fixings in the wheel arches, and the odd screw.
Use this as a rough guide - https://www.scoobynet.com/technical-...r-project.html

 

This should be of some help

Bumper
http://static.opposedforces.com/epc_...1494959001.png

Mudguard
http://static.opposedforces.com/epc_...1494954101.png