howes124

iTrader: (11)

Need some help had some help removing the coil-pacs from my 1996 wrx to fit newage ones, I did the dumbest of things and didn't mark the wires for each cylinder,

How would I go about plugging the new coil-pacs to the correct connecter for the right cylinder ?.

alcazar

iTrader: (2)

Get hold of a photo of one of the correct year for the ones you are using?

Which is.........?

howes124

iTrader: (11)

Sorry I'm lost on this reply

I disconnected the old coil-pacs from the connectors on the engine i did not mark these so i have no idea wot way there should go to make sure the firing order is correct.

GpMarty

iTrader: (7)

if theyre still prety much in situ from where you unplugged them you could use one of the old coil packs to work out which plugged in where as the coil lead would only reach from to plug to the one it came from one of the loom ends will be closer or further... there is 2 shades of grey on the plugs also the lighter ones to the front from memory

howes124

iTrader: (11)

All sorted now :-).