Water temperature sender adapter advise?
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Bagshot
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Water temperature sender adapter advise?
All,
Trying install some Prosport Gauges into my 07 GB270. Hit a slight issue in that the water temperature guage wont work unless I install a water temp sender adapter. I have seen a few on the net but havent a clue what size in mm I need. Can someone help please, I think it is 38mm but want to seek clarification before buying.
Thanks in advance.
Dale
Trying install some Prosport Gauges into my 07 GB270. Hit a slight issue in that the water temperature guage wont work unless I install a water temp sender adapter. I have seen a few on the net but havent a clue what size in mm I need. Can someone help please, I think it is 38mm but want to seek clarification before buying.
Thanks in advance.
Dale
#2
Scooby Regular
iTrader: (2)
Where's it going? If you mean in the top tube, it's 38mm internal diameter........well, it is for a classic
DO get one with an earthing screw/connector, so as to be able to connect the sender body to earth, as some need it.
Best thing is to put the new gauge sender where the one is for the clocks, and move the clocks one to the top tube: you get more accurate readings from the original fitting space.
DO get one with an earthing screw/connector, so as to be able to connect the sender body to earth, as some need it.
Best thing is to put the new gauge sender where the one is for the clocks, and move the clocks one to the top tube: you get more accurate readings from the original fitting space.
#3
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Feb 2013
Location: Bagshot
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Where's it going? If you mean in the top tube, it's 38mm internal diameter........well, it is for a classic
DO get one with an earthing screw/connector, so as to be able to connect the sender body to earth, as some need it.
Best thing is to put the new gauge sender where the one is for the clocks, and move the clocks one to the top tube: you get more accurate readings from the original fitting space.
DO get one with an earthing screw/connector, so as to be able to connect the sender body to earth, as some need it.
Best thing is to put the new gauge sender where the one is for the clocks, and move the clocks one to the top tube: you get more accurate readings from the original fitting space.
BR
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM