jamespedro28

hi,wondered weather anyone would have a walk through of how to remove original 02 bugeye lights and to replace with morette projector headlights [the ones with the built in vented bit].the wiring bits as well please..and a few pictures wouldn't go amiss....i know its a lot,but i would be very grateful.....

jamespedro28

come on people ,,give us some pointers...please.

360ste

iTrader: (1)

Have a look in Tech archive there is a link for free manuals which should provide the info you are after. A quick run through is; remove grill undo two bolts behind grill and third bolt on top of headlight near the wing. Disconnect cable having labelled it and remove the headlight. There is a ball and socket fitting on the headlight so it will need a bit of a pull outwards to free it. You don't say if yours is a WRX or STi. As the WR you need a loom to connect the lights up with as you are going from 1 headlight bulb to two light. On a STi you can just remove the wires from the old bulbs and fit them to the new headlight to connect the bulbs.

jamespedro28

thanks for that ,its a wrx.are both the lights full and dip.or is one full and one dip.is there supposed to be relays with the morette lights..thanks for the help..

360ste

iTrader: (1)

One light is dipped and the other is full, I think the full beam unit has the sidelight bulb in. When I bought mine new they came with a loom for each unit, for use with a wrx but as mine is a STi I did not need it so broke it down so Ihad relays with holders for any job I would do.