boost gauge help - newage wrx
#1
Scooby Regular
Thread Starter
iTrader: (8)
Join Date: Sep 2012
Location: Bromsgrove
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
boost gauge help - newage wrx
I have fitted my boost gauge (https://www.scoobynet.com/scoobynet-...rong-wire.html)
Problem is that I am getting fluctuation, especially at low revs and off cam.
Should I move the gauge feed from the front of the engine and cut the pipe coming from the front of the interooler?
Problem is that I am getting fluctuation, especially at low revs and off cam.
Should I move the gauge feed from the front of the engine and cut the pipe coming from the front of the interooler?
#3
Scooby Regular
iTrader: (1)
Join Date: Mar 2010
Location: bromsgrove
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Hi live in Bromsgrove myself so welcome to come and see my set-up. I have also used the pipe off the manifold and had no problems. What type of guage you using? Are you using the standard see through pipe that comes with the guage?Where have you mounted the sender?Is the pipe kinked anywhere or a tight fitting behind the dash or through bulk head?Are you using the inline filter if it was supplied with the gauge?
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM