the shreksta

iTrader: (20)

i have a second hand depo oil temp gauge with a pod that i want to fit but it was fitted via the sump so the wires hang down which im not keen on really

where can i find (and what am i looking for) the proper kit to fit it to the actual block?

cheers

RICHARD J

iTrader: (4)

EBAY you need a cyl 3 block adapter for oil temp gauge. Sump location can be OK but gives low readings cyl 3 is best, Iv used both & have stuck with cyl 3.

Infected by sti

iTrader: (6)

http://www.scoobyparts.com/acatalog/...TTING_KIT.html

http://rspec.co.uk/gauge-sensor-adap...l-temp-adaptor

http://www.scoobyworld.co.uk/catalog...oducts_id=1591

the shreksta

iTrader: (20)

cheers guys, will these work with the gauge i have? next year i will be putting in a oil pressure gauge so where does that go?

360ste

iTrader: (1)

The oil pressure gauge goes in tandem with the OE oil pressure switch under the alternator. When I first fitted a oil pressure gauge I used a remote unit from Demon tweeks but it looks unsightly. I recently got a new set of gauges from Scoobyclinic and got their own designed adaptor and it looks 1000000% better. Can post a picture tomorrow night if you want.

the shreksta

iTrader: (20)

yes please mate if you can

The Pink Ninja

iTrader: (23)

I ditched the OEM pressure sensor or engine fcuked light as its known as its not really needed on the Newage with a oil pressure gauge, All IMO of course.

alcazar

iTrader: (2)

As above on a classic: my oil pressure SWITCH is on a shelf in the garage.