MY00 interior in a MY94?
#1
Scooby Regular
Thread Starter
Join Date: Oct 2000
Location: Aylesbury, Bucks
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
Any problems in doing the above swop UK MY00 to UK MY94. I know the door cards don't fit and the seat belt anchors need to be swopped, any other problems? How do you get the back seats out of a 4 door?
#2
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Everything fits fine... Cant tell you about back seats as I have a 5dr... Think there may be one less bolt per seat on the newer ones though.
David
David
#3
Scooby Regular
Hi,
I've only ever removed the rear seat base from my MY99, although the MY00 should be exactly the same.
Here's some pics if they help.
There's basically two bolts holding the base in place and a bar & hook which holds the middle of the base to the back of the seats. You have to press down on the middle of the seat and tilt the front upwards to unhook it. If you push down on the seat, you'll expose the hook and see what I'm getting at.
There's a couple of bolts along the bottom holding the back seat in-place. That's as far as I took things installing my ICE equipment. If you want I can have a look at my car over lunch to see what other bolts hold it in.
Stefan
I've only ever removed the rear seat base from my MY99, although the MY00 should be exactly the same.
Here's some pics if they help.
There's basically two bolts holding the base in place and a bar & hook which holds the middle of the base to the back of the seats. You have to press down on the middle of the seat and tilt the front upwards to unhook it. If you push down on the seat, you'll expose the hook and see what I'm getting at.
There's a couple of bolts along the bottom holding the back seat in-place. That's as far as I took things installing my ICE equipment. If you want I can have a look at my car over lunch to see what other bolts hold it in.
Stefan
#4
Scooby Regular
Oh, forgot to mention, my RB5 has a solid rear bulk head, so a std MY00 with split folding seats maybe a bit more compliated.
Stefan
[Edited by ozzy - 5/14/2002 11:06:18 AM]
Stefan
[Edited by ozzy - 5/14/2002 11:06:18 AM]
Thread
Thread Starter
Forum
Replies
Last Post
jonnyboy82
Lighting and Other Electrical
0
29 September 2015 01:59 PM