Engine 'norms'
#1
Hiya,
Can anyone give any pointers re: what the normal readings
are for a scoob engine when reading from Defi gauges?
I'm getting the following readings at the mo:-
Oil Pressure - about 6-7 kgf/cm2 and about 2.3-2.4 kgf/cm2 on tick-over when hot (what the hell is kgf and how do you convert it to PSI? )
Oil Temp - generally around 80-100 degrees C.
EGT - Generally between 400 and 600 degrees C.
Boost - 1.3 kgf/cm2 on peaks
Any pointers as to what is normal would be great...
ta,
Matt
Can anyone give any pointers re: what the normal readings
are for a scoob engine when reading from Defi gauges?
I'm getting the following readings at the mo:-
Oil Pressure - about 6-7 kgf/cm2 and about 2.3-2.4 kgf/cm2 on tick-over when hot (what the hell is kgf and how do you convert it to PSI? )
Oil Temp - generally around 80-100 degrees C.
EGT - Generally between 400 and 600 degrees C.
Boost - 1.3 kgf/cm2 on peaks
Any pointers as to what is normal would be great...
ta,
Matt
Thread
Thread Starter
Forum
Replies
Last Post
Sam Witwicky
Engine Management and ECU Remapping
17
13 November 2015 10:49 AM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM