dooby-do

iTrader: (2)

In need of a bit of help people I'm rebuilding my car at the moment and useing a sti8 block with v4 heads and raised inlet manifold with spacers to allow a bigger turbo to be fitted and the intake pipe to run under the inlet manifold, however with my car being a my95 classic the power steering pump sits infront of the inlet manifold were I need the intake pipe to come thought how could I get around this would I need to fit another pump as I can't really move it to another location as the belts on it run of the pullys at crank ect I'm sure lots of people have got around this issue so any advise would be much appreciated

Jolly Green Monster

iTrader: (4)

You need to change the resevoir to the newer classic version or even better to the remote resevoir from a newage. Might have the kit for that here I could sell thinking about it.

Simon

dooby-do

iTrader: (2)

How much are you looking for the kit, also if I change the resubmit is it just the top section were the fluid goes but keep the original bracket ect

dooby-do

iTrader: (2)

Reservoir sorry

Jolly Green Monster

iTrader: (4)

Will check what I have got here