Hawkeye door cards in a bugeye ??
#5
BANNED
iTrader: (20)
fits fine. i know this as i have done it.
your switches may be different as mentioned above but the cards will fit no problem you may need the metal u shaped bracket behind the door card that the armrest pull handle screws into as its slightly different. other than that its a straight swap
the plastic bit that holds the switch set up is bigger on the hawk your original switches can be removed form the old surround and clipped into the new. only problem is the hawk has a hole for the mirror switch.
i fitted folding mirrors so had to get jdm sti cards due to the extra folding button but it was a straight swap after fitting the u shape bracket
your switches may be different as mentioned above but the cards will fit no problem you may need the metal u shaped bracket behind the door card that the armrest pull handle screws into as its slightly different. other than that its a straight swap
the plastic bit that holds the switch set up is bigger on the hawk your original switches can be removed form the old surround and clipped into the new. only problem is the hawk has a hole for the mirror switch.
i fitted folding mirrors so had to get jdm sti cards due to the extra folding button but it was a straight swap after fitting the u shape bracket
Last edited by tubbytommy; 22 September 2012 at 08:00 PM.
#6
Scooby Regular
Thread Starter
iTrader: (6)
Join Date: Feb 2010
Location: north of the south border
Posts: 4,510
Likes: 0
Received 0 Likes
on
0 Posts
fits fine. i know this as i have done it.
your switches may be different as mentioned above but the cards will fit no problem you may need the metal u shaped bracket behind the door card that the armrest pull handle screws into as its slightly different. other than that its a straight swap
the plastic bit that holds the switch set up is bigger on the hawk your original switches can be removed form the old surround and clipped into the new. only problem is the hawk has a hole for the mirror switch.
i fitted folding mirrors so had to get jdm sti cards due to the extra folding button but it was a straight swap after fitting the u shape bracket
your switches may be different as mentioned above but the cards will fit no problem you may need the metal u shaped bracket behind the door card that the armrest pull handle screws into as its slightly different. other than that its a straight swap
the plastic bit that holds the switch set up is bigger on the hawk your original switches can be removed form the old surround and clipped into the new. only problem is the hawk has a hole for the mirror switch.
i fitted folding mirrors so had to get jdm sti cards due to the extra folding button but it was a straight swap after fitting the u shape bracket
Tubbs, does the door opener all line up ect
#7
BANNED
iTrader: (20)
as said all i needed to change was the metal bracket that the door armrest screws into so make sure you get that with the cards.
my switches plugged straight in but i know emmas wrx bug has a different switch set up, i dont think she has a lock button on hers and you will have a hole where the mirrors go as yours are in the centre console.
so im 100% sure cards will fit but the wiring maybe not but shouldnt be hard to sort out.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
shorty87
Full Cars Breaking For Spares
19
22 December 2015 11:59 AM