scoobaru mad

iTrader: (2)

Evening gents.

Question on the title regarding a 2002 WRX Bugeye. Large top mounted intercoolers. Now i know alot if not all will recommend the STI one. But i dont have an STI scoop, an undertray. Nor do i plan on getting one.

Ive been looking at the millions of options on fleabay like this

http://www.ebay.co.uk/itm/JAPSPEED-S...ht_2377wt_1222

Has anyone tried one. Bar an plate design like the front mounts. If so, what are they like to fitting? ie, is it a direct replacement only a deeper design

Im getting a turbo blanket, heat wrapped down pipe, up pipe and headers to lower under bonnet temps ie heat soak.

just wondering what the fellow subaru comunity thought

Thanks guys

wiggy1

iTrader: (7)

Personally from experience i wouldn't buy anything from eBay! You would be as well buying an sti top mount as you said, and i can't see any problems with running one without a sti scoop or under tray!

I had an sti 10 top mount on my classic with no problems!

Midlife......

iTrader: (2)

I ran an STi top mount on my bug WRX for a while with the Bug scoop and undertray.

Guaranteed to fit, lower pressure drop and more efficient

Shaun

jura11

iTrader: (7)

As above STi TMIC will be good upgrade,but STI TMIC don't like high(higher) boost,they will split

If you want to upgrade,would have look for Hyperflow TMIC


Jura

scoobaru mad

iTrader: (2)

I really appreciate the feed back guys

Question.. the STI top mount is obviously larger, would the extended part above the turbo not induce more heat soak ,as in, not covered by the intercooler scoop shroud, thus negating the positive effects?

Hyperflow? Their intercoolers are probably a 3rd the value of my entire car sorry, but way way outta my budget as much as id like one

There is the age old question though. FMIC or Top mount.

I had a FMIC on my classic, an i think it was the best mod i ever did. theres just the pain in the *** of fitting? Secondly, is it 'VITAL' i get a remap after an upgrade like this. i dont drive like a mad man. just the occasional spirited drive.

thanks for the info peeps

jura11

iTrader: (7)

if you will go with STi TMIC would say,you will need bigger scoop and TMIC splitter,which is extra cost and without this STI TMIC will be not effective as with those parts

Agreed on Hyperflow,they cost lot more than concurrency and if they worth,in many people view yes worth,have look here in the For sale section,i'm sure someone here selling Hyperflow

FMIC on TD04L is in my view not worth,but if you are looking for bigger power at future would say,will worth there

FMIC fitting,depends on the makers,but usually Hybrid or Japspeed FMIC are good and easy to fit

Yes is recommended get mapped your car for this change,would very recommend or at least get car checked


Jura