Putting brembos on a 95
31 July 2012, 06:33 PM
#2
Formerly ScoobyTeknix
iTrader: (64)
Join Date: Feb 2011
Location: Fleetwood, Lancashire
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
fronts are quite easy you would need calipers, disc's and pads and also make sure your wheels will clear the calipers of course we usually sell this sort of set-up for £440 delivered
scott...
scott...
31 July 2012, 07:02 PM
#4
Formerly ScoobyTeknix
iTrader: (64)
Join Date: Feb 2011
Location: Fleetwood, Lancashire
Posts: 2,926
Likes: 0
Received 0 Likes
on
0 Posts
yes with the back it not too hard if you are mechanically minded but a bit more cost and a bit more work over the fronts, calipers and disc's usually sold for £250 the you need a fitting kit from god speed http://www.godspeedbrakes.co.uk/~god...?id_product=91
scott...
scott...
31 July 2012, 07:24 PM
#5
Got them all round on my 98 classic, easy to do, used the Godspeed rear fitting kit, doddle.
I have the smaller Brembo front calipers that an USED to do, they are cleared by WRX 17" wheels.
The rears clear anyway.
If you use newage Brembos, you need 18's, STi 18's are good.
I have the smaller Brembo front calipers that an USED to do, they are cleared by WRX 17" wheels.
The rears clear anyway.
If you use newage Brembos, you need 18's, STi 18's are good.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM