immobiliser problems
#1
Scooby Newbie
Thread Starter
Join Date: Jun 2012
Location: north yorkshire
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
immobiliser problems
2004 legacy 2.5 cat1 alarm with keypad (do not have codes)
car ok this morning but now will not start
found the battery is u/s and the immobiliser will not operate
replaced car battery/ replaced both battery,s in both car keys still no luck
alarm seems to be off as i can open doors and bonnet with-out alarm going
put the key in ignition and turn-- dash inst go round and back to zero still u/s i,am going to call out rac but has anyone idea,s
plus i believe the key and ign barrel with the alarm fitted inside have to be replace togeather any idea of cost as i spent £700 last week on a new clutch and gearbox imput shaft
help getting desperate as i have to do an airport run on tuesday morning
car ok this morning but now will not start
found the battery is u/s and the immobiliser will not operate
replaced car battery/ replaced both battery,s in both car keys still no luck
alarm seems to be off as i can open doors and bonnet with-out alarm going
put the key in ignition and turn-- dash inst go round and back to zero still u/s i,am going to call out rac but has anyone idea,s
plus i believe the key and ign barrel with the alarm fitted inside have to be replace togeather any idea of cost as i spent £700 last week on a new clutch and gearbox imput shaft
help getting desperate as i have to do an airport run on tuesday morning
#3
Scooby Regular
iTrader: (1)
Join Date: May 2011
Location: Nottingham
Posts: 2,263
Likes: 0
Received 0 Likes
on
0 Posts
Hi mate i don't know if you can do a pin reset on legacy but might be worth a try , someone posted the details on here not long ago , if u can't find it let me know and I'll give u the details
Tony
Tony
#4
Scooby Newbie
Thread Starter
Join Date: Jun 2012
Location: north yorkshire
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
rac man said i need the 4 digit code to fix the car. so have to get the info off subaru .you have to pay to get this code and this will have to be put in everytime i need the engine to start then i need to to go to local subaru garage for a reset
(£40 ish) he tested my keys and said they are working but do not operate car doors/alarm
tony i found the page you mentioned but it says i need this code number
to get the code you have to go to the garage with your log book and the 16 digit alarm
serial number but best to ring first to give them time to find number
(£40 ish) he tested my keys and said they are working but do not operate car doors/alarm
tony i found the page you mentioned but it says i need this code number
to get the code you have to go to the garage with your log book and the 16 digit alarm
serial number but best to ring first to give them time to find number
#6
Scooby Regular
iTrader: (1)
Join Date: May 2011
Location: Nottingham
Posts: 2,263
Likes: 0
Received 0 Likes
on
0 Posts
rac man said i need the 4 digit code to fix the car. so have to get the info off subaru .you have to pay to get this code and this will have to be put in everytime i need the engine to start then i need to to go to local subaru garage for a reset
(£40 ish) he tested my keys and said they are working but do not operate car doors/alarm
tony i found the page you mentioned but it says i need this code number
to get the code you have to go to the garage with your log book and the 16 digit alarm
serial number but best to ring first to give them time to find number
(£40 ish) he tested my keys and said they are working but do not operate car doors/alarm
tony i found the page you mentioned but it says i need this code number
to get the code you have to go to the garage with your log book and the 16 digit alarm
serial number but best to ring first to give them time to find number
also if your pins been changed by someone since new your wasting your time going to dealer
ive been through all this only to find my pin had been changed so i reset my own pin
#7
Scooby Newbie
Thread Starter
Join Date: Jun 2012
Location: north yorkshire
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
again thank you for the help
got to the airport and the 4 pin code would not enter into keypad and after a lot of swearing i reprogrammed the keys and now alarm / doors / engine or working fine so just got to buy a new battery today and the car is sorted
got to the airport and the 4 pin code would not enter into keypad and after a lot of swearing i reprogrammed the keys and now alarm / doors / engine or working fine so just got to buy a new battery today and the car is sorted
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM