hi peeps not shore if you can help i just brought a p reg wrx sti import ej20kd engine now im new to the subaru so when i brought it i dropped it to my local garage and had all oils changed got the car back was fine for a little bit took it down the moterway and 1 of the half moon gaskets poped out of the head luckely i noticed and pulled over got the car recovered and took it back to the local garage had all half moon gaskets changed and rocker cover gasket got the car back from the garage friday took it out saturday and started pissing out oil again when i pulled the dip stick out it was really hot could it be that my local garage have put the wrong oil in or have i got more of a problem and what is the best oil to use all help would be appriciated

 

Mate, I know it hurts, but to get reasonable answwers on this site, you MUST use punctuation and TRY and spell correctly.
Otherwise, the most knowledgeable people will just ignore you.

OK, how were these gaskets fitted? You SAID from the cylinder head, I ASSUME you mean from the cam cover?

Had the cam covers been off? What were the gaskets refitted with?

If the engine has got as hot as you say, prepare yourself for the worst.

The grade of oil SHOULDN'T make that much difference.

A word of advice: LOCAL GARAGE and SCOOB do not mix.

ALWAYS use a decent specialist, NOT a dealer. Or pay the consequences.

 

alright mate as i said the half moon gasket poped out so the rocker cover also known as cam cover had to come off to replace it so yes the cam cover has been off as far as i can see they have used some kind of blue sealer what oil is best for these as ive come up from an rs turbo and i know these are a hole new ball game

 

10w 40 or 10w 50 fully synth ,good make like millers, silkolene etc

 

plus the rocker gaskets are a pain to get on properly and dont like being reused

 

cheers mate appreiciated