Walbro 255 fitting on a bugeye.
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Nov 2011
Location: Rotherham
Posts: 424
Likes: 0
Received 0 Likes
on
0 Posts
Walbro 255 fitting on a bugeye.
Has anyone fitted a walbro fuel pump to their bugeye ? A quick guide would be welcomed and any tips or tools / parts / gaskets / seals needed etc.
#2
hi,remove back seats with a 12mm spanner,roll back rear carpet in boot a little to allow access to fuel pump cover unplug connector and remove all 3 pipes attached,undo th efuel pump cover 8mm spanner,lift out pump and you will work the rest out exchanging the walbro in with just a single pipe and connector to hook up,replace all done.
regards marty.
regards marty.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
7
14 December 2015 08:16 AM
matt12
ScoobyNet General
64
16 September 2015 09:16 PM
matt12
Engine Management and ECU Remapping
4
14 September 2015 09:36 AM