Notices
General Technical
Sponsored by:
Sponsored by: CARiD

ALL THE GEAR AND NO IDEA ECU, MAPPING HELP

Thread Tools
 
Search this Thread
 
Old May 6, 2012 | 06:45 PM
  #1  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default ALL THE GEAR AND NO IDEA ECU, MAPPING HELP

hi every1, ive had my new blobeye uk wrx for about a week now and wanted to get a little more out of it. so i went to a newage sti breakers in boston (pmb performance), nice lads, prized 700quidos out of my palm for full blob sti trim, front splitter, vf35, pinks, full decat, pipercross filter, walbro.
one of the lads there has just started mapping (open source) by his own addmission says he has just started done a few with good results, but cant have a/l ect. ive got a local r/r centre called corten-millers, they want 650 all in for l/break ect, is there any other option to me. iv got to get this sorted before i can bolt on all my goodies thanks guys phil
Reply
Old May 6, 2012 | 07:25 PM
  #2  
spanner monkey's Avatar
spanner monkey
Scooby Regular
iTrader: (3)
 
Joined: Mar 2010
Posts: 357
Likes: 0
From: peterborough
Default

Go with a reputable mapper, using some one who's "just started " could turn out very expensive for you.
Personally ive always Richard Bulmer at Tracktive solutions (ecutek) a lot of people use Duncan Graham (race dynamix) for open source & he gets a lot of good feed back here.
First thing is to decide if you want open source or ecutek, then search on here as there are a lot of good, reputable mappers here who will travel to you.
Reply
Old May 6, 2012 | 07:52 PM
  #3  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

can you have a/lag with open source and what is the real differences. i suppose finding a ecu that has already had the licence broke is going to be hard work. thanks
Reply
Old May 7, 2012 | 12:19 AM
  #4  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

can you have switchable maps with opensource mapping ??
Reply
Old May 7, 2012 | 12:33 AM
  #5  
jura11's Avatar
jura11
Scooby Regular
15 Year Member
iTrader: (7)
 
Joined: Apr 2010
Posts: 10,523
Likes: 1
Default

Originally Posted by 4u2nv2
can you have a/lag with open source and what is the real differences. i suppose finding a ecu that has already had the licence broke is going to be hard work. thanks
Originally Posted by 4u2nv2
can you have switchable maps with opensource mapping ??
Yes if will be mapped via new ROM CarBerry,contact Andrew Carr about this or other Open source mappers like Duncan@Race Dynamix

Here is website on Andrew Carr:

http://www.teamcarr.net/

Jura
Reply
Old May 7, 2012 | 10:45 AM
  #6  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

thanks jura11 brill, were abouts are they. any1 got a ecu that has l/break they want to sell me;]
Reply
Old May 7, 2012 | 11:40 AM
  #7  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

any1 got andy carrs email, computer want ditrect me so i can contact him via his web site. misses dont get home till 6 and im crap with pcs after all you cant drive em lol.
Reply
Old May 7, 2012 | 11:48 AM
  #8  
jura11's Avatar
jura11
Scooby Regular
15 Year Member
iTrader: (7)
 
Joined: Apr 2010
Posts: 10,523
Likes: 1
Default

Originally Posted by 4u2nv2
any1 got andy carrs email, computer want ditrect me so i can contact him via his web site. misses dont get home till 6 and im crap with pcs after all you cant drive em lol.
Here i go here is email and tel.number on Andrew Carr


Telephone: 07852 164134

Email: Andrew@teamcarr.net


Jura
Reply
Old May 7, 2012 | 01:01 PM
  #9  
alcazar's Avatar
alcazar
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jun 2002
Posts: 40,788
Likes: 30
From: Rl'yeh
Default

Above all DO get someone who knows what they are doing. A rebuild is lots of £££.
Reply
Old May 7, 2012 | 02:40 PM
  #10  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

Originally Posted by alcazar
Above all DO get someone who knows what they are doing. A rebuild is lots of £££.
yea tell me about it. had a few before, to be expected to a certain point. engine has been done buy tim farmer, just need a few more miles on the clock before we can bolt the goodies on and get it mapped, im trying real hard to find a ecu with liecence break. cant put a wanted thread up, it will not let me, like i said before crap with pcs. thanks
Reply
Old May 7, 2012 | 04:30 PM
  #11  
alcazar's Avatar
alcazar
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jun 2002
Posts: 40,788
Likes: 30
From: Rl'yeh
Default

I don't think you can post in wanted unless you are a paying member, but it's not expensive.
Reply
Old May 7, 2012 | 04:39 PM
  #12  
bugblue1's Avatar
bugblue1
Scooby Regular
iTrader: (3)
 
Joined: Mar 2012
Posts: 419
Likes: 0
From: Norfolk
Default

just had mine done by duncan today fantastic results,highly recommend him.
Reply
Old May 7, 2012 | 04:53 PM
  #13  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

Originally Posted by bugblue1
just had mine done by duncan today fantastic results,highly recommend him.
did you go to him. and what did you go for ecutek or open source,
Reply
Old May 8, 2012 | 12:35 PM
  #14  
bugblue1's Avatar
bugblue1
Scooby Regular
iTrader: (3)
 
Joined: Mar 2012
Posts: 419
Likes: 0
From: Norfolk
Default

open source,&funny enough duncan recommended tim farmer to me for couple of things i want doing,give him a call you wont be dissapointed he's a great guy.
Reply
Old May 8, 2012 | 01:05 PM
  #15  
BrownPantsRacing's Avatar
BrownPantsRacing
Scooby Regular
iTrader: (6)
 
Joined: Oct 2010
Posts: 8,701
Likes: 128
From: Herts & Bucks
Default

Why do you want anti-lag and launch-control? Is it just for the prestige? Fairly pointless on a road car to be honest. Anti-lag will kill your turbo very fast, launch control will kill your gearbox & diff before you know it!

Also, if your fitting those bits you will also need an STI TMIC and undertray. Also much better brakes, trust me!
Reply
Old May 8, 2012 | 01:13 PM
  #16  
BrownPantsRacing's Avatar
BrownPantsRacing
Scooby Regular
iTrader: (6)
 
Joined: Oct 2010
Posts: 8,701
Likes: 128
From: Herts & Bucks
Default

Also, as said above. Use a recommended mapper with some experience. Its your car, engine & money that could be at stake!

Good luck with it anyhoo.
Reply
Old May 9, 2012 | 11:07 AM
  #17  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

Originally Posted by BrownPantsRacing
Why do you want anti-lag and launch-control? Is it just for the prestige? Fairly pointless on a road car to be honest. Anti-lag will kill your turbo very fast, launch control will kill your gearbox & diff before you know it!

Also, if your fitting those bits you will also need an STI TMIC and undertray. Also much better brakes, trust me!
brakes are not good brembos will be going on, also front mount and red inlet with delets.
got to have antilag simply becaus it sound the nuts.
Reply
Old May 9, 2012 | 11:27 AM
  #18  
BrownPantsRacing's Avatar
BrownPantsRacing
Scooby Regular
iTrader: (6)
 
Joined: Oct 2010
Posts: 8,701
Likes: 128
From: Herts & Bucks
Default

Sounds like you got most of the bits you need covered then! Nice one!

Agreed that anti-lag sounds great, but will not do your turbo any good in the long run. I got Duncan (RaceDynamix) to map mine to add a few pops and bangs. Sounds great and no turbo issues.
Reply
Old May 9, 2012 | 12:14 PM
  #19  
andy_rr's Avatar
andy_rr
Scooby Regular
 
Joined: Jul 2011
Posts: 54
Likes: 0
From: Edinburgh
Default

Depends where you are but Alistair at Trackhound has a good rep in Scotland :
http://trackhound.co.uk/
Reply
Old May 10, 2012 | 12:48 AM
  #20  
4u2nv2's Avatar
4u2nv2
Thread Starter
Scooby Regular
 
Joined: Oct 2010
Posts: 275
Likes: 1
Default

Originally Posted by andy_rr
Depends where you are but Alistair at Trackhound has a good rep in Scotland :
http://trackhound.co.uk/
im in skegy vegas, lincs. we have a r/r centre near us (corten-millers) but been advised only any good for power print outs. thanks guys
ps taking the scoob all the way to the isle of white for a long w/end, cant wait, mileage will be up bye time i get bk, so we can book a mapper and bolt the goodies on woop woop see how long this g/box lasts lol.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
55
Aug 5, 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
Jul 17, 2016 10:43 PM
MightyArsenal
Wheels, Tyres & Brakes
6
Sep 25, 2015 08:31 PM
Baskey
General Technical
3
Sep 25, 2015 03:45 PM




All times are GMT +1. The time now is 07:40 PM.