jazzyjembreaze

iTrader: (11)

Pulsing or flashing rear brake lights
Anyone done this on a new age

pooeater

It happens wen the ABS is actvated or brakeing hard well on the astra anyways

tubbytommy

iTrader: (20)

i think he means one of these.
http://www.ebay.co.uk/itm/120873317512#ht_845wt_1270
i have one fitted with a switch to turn it on and off.
it only activates the centre light in the spoiler.

pooeater

easy to wire tom?

jazzyjembreaze

iTrader: (11)

More or less tommy
Like you see on high end cars
It can't be that difficult , will make some inquiries over nxt few days

tubbytommy

iTrader: (20)

They dont pulse on high end cars. If you have seen this on top gear etc. Its a trick of the cameras due to the brake lights being leds.
If you see them with your eyes they dont flash.

jazzyjembreaze

iTrader: (11)

I don't watch top gear ( clarkson thing )
Def seen them with my own eyes flashing , saw a Bentley other day

alcazar

iTrader: (2)

It will only work with LEDs, afaik, since they switch 1000 times faster than an incandescent bulb.

scrappydoo7619

iTrader: (13)

be interested to see if this can be done

jazzyjembreaze

iTrader: (11)

Jst phoned prestige car showroom nearbye ha ha

Blinking smart stop pro he has just recommended
Not just for led
But must have separate wiring looms for individual lights
Will look further into this
Thanks all reply's

tubbytommy

iTrader: (20)

thats basically the same as that ebay link i sent you, it just fits in the wiring before the bulb and pulses it.

jazzyjembreaze

iTrader: (11)

Ahh yes , just looked it workes on both led & normal bulb variant
Top of page is your centre brake light tommy scrolling down its smart stop plus wich is for the main opposing brake lights

Might give it a Wurl
Might get a single for the motorbike also
Thanks again for the reply

steve ex vauxhall

iTrader: (5)

These are pretty good
I had one on my zafira gsi wired to the high level brake light in the back window.
Bought it off 3rdbrakelightflasher.com a few years back, although it was a lot more expensive than the one above

only had 2 wires that you spliced into the wiring going to the light, and a small control box to set it how you liked it.

Mine was set to flash 4 times then stay on, and if you braked again within 15 seconds it wouldnt flash again, to avoid pissing people off when in traffic.

Really suprised how you saw people drop back when it flashed, i'd have another anyway

scoobynewbie72

iTrader: (1)

if you wanted it on all the time make ur own from a flasher unit, relay and wire it at the brake pedal end, stops the need for any rear end wiring.

scoobynewbie72

iTrader: (1)

http://www.ebay.co.uk/itm/Indicator-...713#vi-content
here you go, even easier, just fit a switch either side of this so you can over ride it to be solid, the flasher just goes inline with the wiring at your brake pedal.

jazzyjembreaze

iTrader: (11)

That sounds an easy enough do 72
The ones I hav been looking at this eve give out 5 flashes then go to solid until you release then press again , & so on
With this your saying I would have to implement a switch to go from flash to solid
Would thr be anyway getting round this if I was to go at it from the brake pedal end ?