Help 6 speed oil level
#1
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Posts: 2,272
Likes: 0
Received 0 Likes
on
0 Posts
Help 6 speed oil level
Hi all,
Just filled my 6 speed after fitting today & it's taken 4.5 litres but is still on min on dipstick. I don't mind putting more in but Iv noticed no matter how hard I push the plastic yellow part of the dipstick will not go all the way into the tube upto the shoulder. Is this normal or does this explain my problem?
Thanks, Richard.
Just filled my 6 speed after fitting today & it's taken 4.5 litres but is still on min on dipstick. I don't mind putting more in but Iv noticed no matter how hard I push the plastic yellow part of the dipstick will not go all the way into the tube upto the shoulder. Is this normal or does this explain my problem?
Thanks, Richard.
#4
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Posts: 2,272
Likes: 0
Received 0 Likes
on
0 Posts
Was told 4 to 4.5 on a 6 speed when totally empty. Don't know if I'm doing the right thing but I'm filing the plastic part now so it's thinner to fit but I don't see why it would be too fat anyway unless it's the wrong one or it's swelled.
#5
Scooby Regular
Thread Starter
iTrader: (4)
Join Date: Apr 2008
Posts: 2,272
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for replies sorted it now. Filed it to fit & it's 2mm over top mark. It's just been apart for synchros so slightly over should be OK as Iv heard the level can drop slightly after a drive.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM