Hey guys,
Got a bit a problem...
My air con tensioner decided to die yesterday so thought I'd remove it.
Had to remove the alternator belt to get the air con belt off. All went well untill I put the alternator/p steering belt back on. Tightened up started car and the belt started squeezing like mad! Also the pose steering was very hard and juddery. Loosened a little to about half inch movement and still the same! Was fine untill I touched it so any advice of what I've done wrong or new problems would be greatly appreciated!
Thanks again Ryan

 

sounds like you need to tighten the belt more

 

Just nip it up, it'll be a bit loose, mine's the same so I'm going to tweak mine tomorrow

 

thanks for the replys guys, and after nipping it up all sorted!
cheers