Notices
General Technical
Sponsored by:
Sponsored by: CARiD

engine bay wiring loom,,,,,, help what goes where ?

Thread Tools
 
Search this Thread
 
Old Apr 8, 2012 | 12:11 PM
  #1  
Ginge !'s Avatar
Ginge !
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,736
Likes: 0
Default engine bay wiring loom,,,,,, help what goes where ?

where does it all go to, also the little connectors, think one is the oil pressure switch but which one and what are the others ???


Name:  enginewiringloom.jpg
Views: 0
Size:  96.9 KB
Reply
Old Apr 8, 2012 | 12:18 PM
  #2  
Primeiro's Avatar
Primeiro
Scooby Regular
 
Joined: Dec 2011
Posts: 140
Likes: 0
From: Aylesbury
Default

Where r u based bud?

Prob best to run over everything in person or on phone.

Let me know or can go through everything here if u wish.

Cheers

Stephen
Reply
Old Apr 8, 2012 | 12:41 PM
  #3  
JdcTypeR's Avatar
JdcTypeR
Scooby Regular
20 Year Member
iTrader: (19)
 
Joined: Feb 2005
Posts: 1,412
Likes: 0
From: In my car
Default

Brown connector coolant temp sensor, the grey one above it crank sensor.
Not sure about the other two off the top of my head
Reply
Old Apr 8, 2012 | 12:44 PM
  #4  
JdcTypeR's Avatar
JdcTypeR
Scooby Regular
20 Year Member
iTrader: (19)
 
Joined: Feb 2005
Posts: 1,412
Likes: 0
From: In my car
Default

Where you have them as coil pack etc I think the white one is for the knock sensor.
Reply
Old Apr 8, 2012 | 04:12 PM
  #5  
Ginge !'s Avatar
Ginge !
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,736
Likes: 0
Default

im based in watford and work in alperton

wish i never took this apart

is this closer or even accurate ?

Name:  enginewiringloom1.jpg
Views: 0
Size:  113.4 KB
Reply
Old Apr 8, 2012 | 04:51 PM
  #6  
JdcTypeR's Avatar
JdcTypeR
Scooby Regular
20 Year Member
iTrader: (19)
 
Joined: Feb 2005
Posts: 1,412
Likes: 0
From: In my car
Default

The single terminal connectors are oil pressure sensor and coolant temp sensor for the gauge. The one that is angled is oil pressure
What car is the loom off?
Reply
Old Apr 8, 2012 | 05:51 PM
  #7  
Ginge !'s Avatar
Ginge !
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,736
Likes: 0
Default

its a v3 sti loom, oh when i took out the loom i had to cut a wire that was rather terrible soldered on to the passenger side look connector, anyone seen this before ?

the loom used to have the black spiral stuff with insulation tape on it and looked terrible so i recovered it in self amalgamating tape to tidy it up a bit
Reply
Old Apr 8, 2012 | 07:04 PM
  #8  
Don Clark's Avatar
Don Clark
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2003
Posts: 7,842
Likes: 834
From: Harpenden
Default




More info here..............

http://opposedforces.com/parts/impre...ne_electronic/

Last edited by Don Clark; Apr 8, 2012 at 07:06 PM.
Reply
Old Apr 8, 2012 | 08:17 PM
  #9  
Sprint Chief's Avatar
Sprint Chief
Scooby Regular
 
Joined: Feb 2002
Posts: 879
Likes: 0
From: Earth
Default

From here:



E1, Grey 8 pin, Bulkhead wiring harness
E2, Grey 12 pin, Bulkhead wiring harness
E3, Grey 16 pin, Bulkhead wiring harness
E4, blue 2 pin, purge control solenoid valve
E5, light grey 2 pin, injector 1
E6, dark grey 2 pin, injector 3
E7, grey 3 pin, idle control solenoid
E8, brown 2 pin, engine coolant temp sensor
E9, 1 pin, thermometer
E10, grey 2 pin, crankshaft pos sensor
E11, 1 pin, oil pressure switch
E12, grey 3 pin, ignition coil
E13, grey 3 pin, throttle position sensor
E14, grey 1 pin, knock sensor
E15, light grey 2 pin, camshaft position sensor
E16, light grey 2 pin, injector 2
E17, dark grey 2 pin, injector 4
E19, grey 1 pin, power steering oil pressure switch
Reply
Old Apr 12, 2012 | 07:39 PM
  #10  
Ginge !'s Avatar
Ginge !
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,736
Likes: 0
Default

You know I introduced eurocarparts to that site when I worked there and totally forgot about it,,,,, which is bad as I work at a main dealer as a partsman

Cheers though very good help
Reply
Old Apr 12, 2012 | 07:49 PM
  #11  
Ginge !'s Avatar
Ginge !
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Mar 2007
Posts: 1,736
Likes: 0
Default

https://www.scoobynet.com/scoobynet-...ml#post8489134

How stupid do I feel that I posted up a link a few years ago
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
JimBowen
ICE
5
Jul 2, 2023 01:54 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
T.K
General Technical
10
Oct 2, 2015 11:35 AM
bluebullet29
General Technical
2
Sep 27, 2015 07:52 PM
shorty87
Other Marques
0
Sep 25, 2015 08:52 PM




All times are GMT +1. The time now is 09:32 PM.