engine bay wiring loom,,,,,, help what goes where ?
08 April 2012, 12:11 PM
#1
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
engine bay wiring loom,,,,,, help what goes where ?
where does it all go to, also the little connectors, think one is the oil pressure switch but which one and what are the others ???
08 April 2012, 05:51 PM
#7
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
its a v3 sti loom, oh when i took out the loom i had to cut a wire that was rather terrible soldered on to the passenger side look connector, anyone seen this before ?
the loom used to have the black spiral stuff with insulation tape on it and looked terrible so i recovered it in self amalgamating tape to tidy it up a bit
the loom used to have the black spiral stuff with insulation tape on it and looked terrible so i recovered it in self amalgamating tape to tidy it up a bit
Trending Topics
08 April 2012, 07:04 PM
#8
Scooby Regular
Last edited by Don Clark; 08 April 2012 at 07:06 PM.
08 April 2012, 08:17 PM
#9
Scooby Regular
Join Date: Feb 2002
Location: Earth
Posts: 879
Likes: 0
Received 0 Likes
on
0 Posts
From here:
E1, Grey 8 pin, Bulkhead wiring harness
E2, Grey 12 pin, Bulkhead wiring harness
E3, Grey 16 pin, Bulkhead wiring harness
E4, blue 2 pin, purge control solenoid valve
E5, light grey 2 pin, injector 1
E6, dark grey 2 pin, injector 3
E7, grey 3 pin, idle control solenoid
E8, brown 2 pin, engine coolant temp sensor
E9, 1 pin, thermometer
E10, grey 2 pin, crankshaft pos sensor
E11, 1 pin, oil pressure switch
E12, grey 3 pin, ignition coil
E13, grey 3 pin, throttle position sensor
E14, grey 1 pin, knock sensor
E15, light grey 2 pin, camshaft position sensor
E16, light grey 2 pin, injector 2
E17, dark grey 2 pin, injector 4
E19, grey 1 pin, power steering oil pressure switch
E1, Grey 8 pin, Bulkhead wiring harness
E2, Grey 12 pin, Bulkhead wiring harness
E3, Grey 16 pin, Bulkhead wiring harness
E4, blue 2 pin, purge control solenoid valve
E5, light grey 2 pin, injector 1
E6, dark grey 2 pin, injector 3
E7, grey 3 pin, idle control solenoid
E8, brown 2 pin, engine coolant temp sensor
E9, 1 pin, thermometer
E10, grey 2 pin, crankshaft pos sensor
E11, 1 pin, oil pressure switch
E12, grey 3 pin, ignition coil
E13, grey 3 pin, throttle position sensor
E14, grey 1 pin, knock sensor
E15, light grey 2 pin, camshaft position sensor
E16, light grey 2 pin, injector 2
E17, dark grey 2 pin, injector 4
E19, grey 1 pin, power steering oil pressure switch
12 April 2012, 07:39 PM
#10
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
You know I introduced eurocarparts to that site when I worked there and totally forgot about it,,,,, which is bad as I work at a main dealer as a partsman
Cheers though very good help
Cheers though very good help
12 April 2012, 07:49 PM
#11
Scooby Regular
Thread Starter
iTrader: (1)
Join Date: Mar 2007
Posts: 1,736
Likes: 0
Received 0 Likes
on
0 Posts
https://www.scoobynet.com/scoobynet-...ml#post8489134
How stupid do I feel that I posted up a link a few years ago
How stupid do I feel that I posted up a link a few years ago
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
