Cold Air Induction Kit Filter
#2
Scooby Regular
iTrader: (7)
Depends if you want stick with HDi filter or you can go with K&N filter RU-3130,which are mainly used in APS CAIK
http://www.opieoils.co.uk/p-68795-kn...er-filter.aspx
Jura
http://www.opieoils.co.uk/p-68795-kn...er-filter.aspx
Jura
#3
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Mar 2009
Location: Lincs
Posts: 435
Likes: 0
Received 0 Likes
on
0 Posts
Jura,
Wanted to try and get a K&N as after the winter the HDi one looks a bit the worse for wear and has started to rust by the look of it. I also wanted the right size one so I can just change it rather than having to get the old one off to measure it then take it off again to put the new one on.
Do you know if the one in the link fits the HDi pipe? Looking at the sizes it seems a bit small.
Thanks for your help.
Arthur
Wanted to try and get a K&N as after the winter the HDi one looks a bit the worse for wear and has started to rust by the look of it. I also wanted the right size one so I can just change it rather than having to get the old one off to measure it then take it off again to put the new one on.
Do you know if the one in the link fits the HDi pipe? Looking at the sizes it seems a bit small.
Thanks for your help.
Arthur
#4
Scooby Regular
iTrader: (7)
Jura,
Wanted to try and get a K&N as after the winter the HDi one looks a bit the worse for wear and has started to rust by the look of it. I also wanted the right size one so I can just change it rather than having to get the old one off to measure it then take it off again to put the new one on.
Do you know if the one in the link fits the HDi pipe? Looking at the sizes it seems a bit small.
Thanks for your help.
Arthur
Wanted to try and get a K&N as after the winter the HDi one looks a bit the worse for wear and has started to rust by the look of it. I also wanted the right size one so I can just change it rather than having to get the old one off to measure it then take it off again to put the new one on.
Do you know if the one in the link fits the HDi pipe? Looking at the sizes it seems a bit small.
Thanks for your help.
Arthur
Hi Arthur
I would contact here Harvey,which is dealer of HDI and i'm sure he will help you.
What i know many people use HyperFlow/K&N or Green Cotton as replacement.
Not sure what size of pipework of CAI you have,i think you have 3",but someone can prove i'm wrong
As i said,contact the Harvey for best advice
Here is link on the HyperFlow filters which people use them on HDi CAIK
http://www.hyperflow.com.au/index.ph...ir-intakes-cai
Jura
#6
Scooby Regular
iTrader: (7)
CAIK can be restrictive above 400bhp,i would go route of RCM big cone filter and some cold air feed(but we are still not running cold air feed at 490bhp)
JapSpeed CAIK is similar as HDi which can be good option and not expensive.
Biggest filter not sure,really Ricky,but Dave@IntialD has fitted as CAIK RCM big cone
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM