Best place UK, troubleshooting + mapping
27 February 2012, 02:20 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jun 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Best place UK, troubleshooting + mapping
Hi, I am a norwegian that has had problems with getting any good power from my md321h..about 300bhp
Not sure if its the car or that tuners over here dont know how to work that turbo, or what. Long story, keeping it short here.
Anyway, main point is I am considering coming over to the UK to a garage, having them troubleshoot the setup, making necesary adjustmenst/part changes and get a new map.
I might have the turbo itself checked by lateral in advance to rule that out..
What/where are my best bet for a one-stop-fix-all-drive-home?
Input/suggestions?
roger clark, scoobyclinic?
Not sure if its the car or that tuners over here dont know how to work that turbo, or what. Long story, keeping it short here.
Anyway, main point is I am considering coming over to the UK to a garage, having them troubleshoot the setup, making necesary adjustmenst/part changes and get a new map.
I might have the turbo itself checked by lateral in advance to rule that out..
What/where are my best bet for a one-stop-fix-all-drive-home?
Input/suggestions?
roger clark, scoobyclinic?
Last edited by presabgo; 27 February 2012 at 08:31 PM.
28 February 2012, 01:32 PM
#2
Scooby Newbie
Thread Starter
Join Date: Jun 2008
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
no one?
I am looking for somebody that both troubleshoot, have necesary parts if something needs to be changed, does whatever needed, does a good job, and do a good mapping..preferably without ruining me.
I am coming via the channel so I dont want to drive to scotland :-) but other than that I can drive a bit around as long as its worth it
I am looking for somebody that both troubleshoot, have necesary parts if something needs to be changed, does whatever needed, does a good job, and do a good mapping..preferably without ruining me.
I am coming via the channel so I dont want to drive to scotland :-) but other than that I can drive a bit around as long as its worth it
28 February 2012, 02:27 PM
#3
Scooby Regular
Join Date: Dec 2010
Posts: 3,241
Likes: 0
Received 0 Likes
on
0 Posts
no one?
I am looking for somebody that both troubleshoot, have necesary parts if something needs to be changed, does whatever needed, does a good job, and do a good mapping..preferably without ruining me.
I am coming via the channel so I dont want to drive to scotland :-) but other than that I can drive a bit around as long as its worth it
I am looking for somebody that both troubleshoot, have necesary parts if something needs to be changed, does whatever needed, does a good job, and do a good mapping..preferably without ruining me.
I am coming via the channel so I dont want to drive to scotland :-) but other than that I can drive a bit around as long as its worth it
28 February 2012, 04:36 PM
#4
You already know 
Roger Clark MS will get the best out of your car, and their hourly rate is reasonable. Do it right, do it once and all.... Best to call both of them and see how you feel. I just dropped my car off at RCM and feel 110% confident I am going to be happy when I get it back
Roger Clark MS will get the best out of your car, and their hourly rate is reasonable. Do it right, do it once and all.... Best to call both of them and see how you feel. I just dropped my car off at RCM and feel 110% confident I am going to be happy when I get it back
01 March 2012, 11:09 AM
#5
Subaru Tuning Specialist
Join Date: Jun 2002
Location: 7.74 @179 mph 1/4 mile - road legal
Posts: 6,654
Likes: 0
Received 1 Like
on
1 Post
Optionally, depending on the year of your car and ECU, you could have a tuner from the UK dial-in remotely and check your datalogs as you test the car, or they could be emailed across. This may mean you buying some software such as deltadash but its going to be much cheaper than a trip to the UK.
Thread
Thread Starter
Forum
Replies
Last Post