Induction kit oil substitute?
15 February 2012, 08:50 PM
#1
Scooby Regular
Thread Starter
Induction kit oil substitute?
Hi I have a K&N style induction kit fitted which is pretty dirty and needs a good clean.
I know that the filter needs to be oiled with specific oil after cleaning but i dont have any. Is there any oil i can use as a substitute?
I have read that gearbox or light weight engine oil will do the trick? As long as not too much is applied.
Cheers
I know that the filter needs to be oiled with specific oil after cleaning but i dont have any. Is there any oil i can use as a substitute?
I have read that gearbox or light weight engine oil will do the trick? As long as not too much is applied.
Cheers
16 February 2012, 10:41 AM
#4
16 February 2012, 10:58 AM
#5
Scooby Regular
Thread Starter
was just going to put a small amount on a cloth and dap it on.
I know that too much can foul up the maf but was only going to put a small amount on.
I have read on other forums that this can be used as a substitute for the proper oil.
I know that too much can foul up the maf but was only going to put a small amount on.
I have read on other forums that this can be used as a substitute for the proper oil.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM
