Prodrive SP ecu
#2
3 plug prodrive ecu will fit the my99/00
are there any numbers on the 'can/cover' ?? (a18-000-DIX is the correct number for 99/00)
alan
are there any numbers on the 'can/cover' ?? (a18-000-DIX is the correct number for 99/00)
alan
Last edited by albob; 04 February 2012 at 06:17 PM. Reason: cos I cannot count !
#3
Scooby Regular
iTrader: (10)
Yes a prodrive SP will be a straight plug & play in your MY2000 uk turbo. You need to make sure you buy the correct one , as yours is a 3 plug ecu,not a 4 plug . A 4 plug ecu will fit the earlier cars(1993 - 1996).
The one you want should look like this,bar the 4 numbers in black which will be different :
The one you want should look like this,bar the 4 numbers in black which will be different :
Last edited by midnight; 04 February 2012 at 07:08 AM.
#5
Scooby Regular
iTrader: (10)
Prodrive ecu will normally boost the power from 215 bhp up to around 240 - 245 bhp,with a substantial more torque than your std ecu.It is one of the cheapest ways to boost performance on a std car,but works at its best with the prodrive intercooler Y pipe and a deresonated centre & prodrive backbox.
I used mine fully decatted with a scoobysport backbox and had no issues,but it is said that the prodrive ecu does not like to be run fully decatted.
Pricewise they can sell from £200 - £350
I used mine fully decatted with a scoobysport backbox and had no issues,but it is said that the prodrive ecu does not like to be run fully decatted.
Pricewise they can sell from £200 - £350
Trending Topics
#8
#9
Scooby Regular
iTrader: (2)
Join Date: Apr 2009
Location: Cambridge
Posts: 214
Likes: 0
Received 0 Likes
on
0 Posts
agree as mentioned above the one you want is the 3 plug with a grey socket as pictured. Nobody mentioned that the 97/98 model cars are also 3 plug but the socket on the ecu is yellow like the earlier 4 plugged ones. A my97/my98 yellow socket SP ecu wont work on a my99 my00 car. Hope thats right! Also I think the my99 my00 grey plugged ones are plug & play on a turbo 2000 i.e. no key coding like some of the earlier or later ones. The only slight problem would be if the car in question is a JDM model in which case I think it may need a couple of pins swapping but I am not certain about that.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM