intercooler upgrade?
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Dec 2011
Posts: 47
Likes: 3
From: winsford,cheshire
hi would this be a suitible upgrade for my98 terzo or is it the same as my standard thanks will
http://www.ebay.co.uk/itm/Subaru-Imp...item336e9d9f30
http://www.ebay.co.uk/itm/Subaru-Imp...item336e9d9f30
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Dec 2011
Posts: 47
Likes: 3
From: winsford,cheshire
hi would this be a suitible upgrade for my98 terzo or is it the same as my standard thanks will
http://www.ebay.co.uk/itm/Subaru-Imp...item336e9d9f30
http://www.ebay.co.uk/itm/Subaru-Imp...item336e9d9f30
had to get a 1 3/4 inch long piece of ally tube welded where the original re-circ valve mounted for my dump valve.took 5 minutes and cost a tenner.pipes were off ebay for £7 posted.no knocking on gearbox mount or bulkhead and used original braclets just had to drill new hole in o/s one and move across an inch.had full headers,up-pipe,full decat system,walbro pump and induction and went from 246bhp to 260 when checked at enginetuner.they were impressed at the gains with no map and ran sweet and safe.
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Dec 2011
Posts: 47
Likes: 3
From: winsford,cheshire
do you think ill be able to make this fit
https://www.scoobynet.com/subaru-par...tercooler.html
thanks will
https://www.scoobynet.com/subaru-par...tercooler.html
thanks will
Trending Topics
Thread Starter
Scooby Regular
iTrader: (1)
Joined: Dec 2011
Posts: 47
Likes: 3
From: winsford,cheshire
Thread
Thread Starter
Forum
Replies
Last Post





