anti lag system question
#1
anti lag system question
Right iam looking into running anti lag system on my95 wrx import might go for the gem ecu setup, what do i need to run this safely i have a td05 16g,decat pipe,sti crank,wrx rods and pistons i do have a new fuel pump and 550 injectors to go in as and when. any more info would help alot.
#4
Scooby Regular
iTrader: (3)
Join Date: Aug 2000
Location: 1600cc's of twin scroll fun :)
Posts: 25,565
Likes: 0
Received 2 Likes
on
2 Posts
Anti lag will kill your engine/turbo (hence one of the reasons wrc cars have rebuilds every 1k miles ) and those engines are built to run anti lag, your normal road going car will suffer, and its illegal to use on the road anyway so its really pointless to have.
You can have pops n bangs added (a bit of overfuelling on lift off), which is much more friendly
Tony
You can have pops n bangs added (a bit of overfuelling on lift off), which is much more friendly
Tony
Trending Topics
#8
Scooby Senior
iTrader: (41)
Simtek ECU and just get it mapped/unlocked
I have it on mine but it gets boring after a while I wouldn't worry about the turbo given a replacement TD05 on the 95's is like 50-100, possibly the cheapest of all the turbos to replace second hand
Quite pointless in this form and no real application due to noise restrictions.
Good in tunnels though
http://www.youtube.com/watch?v=lWR7_KqGucA
http://www.youtube.com/watch?v=RYbTn1L3_fA
http://www.youtube.com/watch?v=bQLJH...eature=related
I have it on mine but it gets boring after a while I wouldn't worry about the turbo given a replacement TD05 on the 95's is like 50-100, possibly the cheapest of all the turbos to replace second hand
Quite pointless in this form and no real application due to noise restrictions.
Good in tunnels though
http://www.youtube.com/watch?v=lWR7_KqGucA
http://www.youtube.com/watch?v=RYbTn1L3_fA
http://www.youtube.com/watch?v=bQLJH...eature=related
#10
i think jgm can sort out the simtek ecu..will have to look in to it a bit more, i also have 3 td05 16g that need rebuilding i might convert one with a 20g comp wheel and housing and have a 90 deg pipe so i can keep the top entry system then put all the other bits on and get it mapped.
#16
#19
Scooby Regular
iTrader: (7)
Join Date: Sep 2004
Location: Devon
Posts: 1,115
Likes: 0
Received 0 Likes
on
0 Posts
simtek als and launch are on separate switches, launch can be set to use the nps in the gearbox but from personal experience the switches are pretty flakey on the earlier cars and your better off with an external switch.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Brzoza
Engine Management and ECU Remapping
1
02 October 2015 05:26 PM