Chris85

Hi there,

i want to rebuild my Engine now and i would like to run 350hp save.
For the internals i have mahle forged pistons , eagle rods, cosworth main and rod bearrings, 12mm oil pump and cometic head gasket.

Now my Problems:
which crank is the best for this projekt? is the v4 sti crank ok?
On which place i have a chance to order the complete engine gasket kit? cylinderhead and main bolts?

Please help me to realize this projekt.

kind regards Chris

ukpaisley

iTrader: (4)

V4 is fine for 400+, you have already cured weak point - the rods

Chris85

Are the eagle rods not so god ?

quattroowner

iTrader: (5)

There very good. What i think he means is the standard Rods are the main weak point in these engine's when going for higher power and torque.

Eagle are well known and very good.

The V4 Sti crank Will be fine for it. They have been used in engine's running 5- 600 Bhp. Just get it checked over and cleaned and the crank be fine.

Have a look on here for lateral performance. . there Really good and will have most the part's you need (gasket set's,ARP head bolts etc etc) hope this help's a little