crazyspeedfreakz

iTrader: (92)

Ok so spoken to two people 1 said I should use and the other said not to use a gasket sealent on the rocker cover gaskets, I have new Subaru gaskets and was wondering if it's best to seal them in place for extra protection


To use or not to use gasket seal helllppp ?

crazyspeedfreakz

iTrader: (92)

Loctite 5910 ????

Scooby David

iTrader: (3)

Yep use it, trust me i have done mine, i used a poor sealant and it didnt work so use the black loctite gasket sealant! I had to do mine twice and you dont want to be doing that.

crazyspeedfreakz

iTrader: (92)

Hi David ... Was it the 1 in the black & White tube ? Loctite 5910 ... Think u can pick it up from halfords

Cheers

Scooby David

iTrader: (3)

Yes mate - http://www.halfords.com/webapp/wcs/s...ource=shopping

crazyspeedfreakz

iTrader: (92)

Yep that's the 1 thanks fella

The Rig

iTrader: (13)

i went one further and used the copper one, higher temp threshold

still from halfords

http://www.halfords.com/webapp/wcs/s...egoryId_255217

crazyspeedfreakz

iTrader: (92)

I did see that 1 but was abit unsure .. Thanx 4 the tip

Any advise on were to seal or do I just seal most of rocker cover where the gasket goes into..

Cheers

ditchmyster

iTrader: (7)

You should order new bolts and rubber washers for the sake of an extra £20 and seal around them as well, then you really wont need to do it again, and i think they need to be torqued at 5Nm if memory serves me right.

crazyspeedfreakz

iTrader: (92)

Thanks I forgot to ask what the torque setting was how sure are u that is correct ?.

ditchmyster

iTrader: (7)

I'm pretty sure but ask the question by starting another thread and i'm sure someone will back me up