STI5300

iTrader: (4)

I'm doing a clutch and swopping the plastic access plate for a metal one. I bought these parts as a kit and they came with a rear crank seal. I would like to change it as I have everything apart at the moment but what tool do you suggest for pulling out the old one or do they pop out fairly easily

Thanks

al125

iTrader: (2)

not that easy to take out but easy to get it wrong and gouge the sealing surface on the block. With the fly wheels off unless you can see a leak i would just leave it alone but it you have to do it i normaly use a pic and try to get behind the seal by going down the side of the crank.