Notices

340bhp Hawkeye WRX

Thread Tools
 
Search this Thread
 
Old 21 August 2011, 08:59 PM
  #1  
etxp85
Scooby Regular
Thread Starter
 
etxp85's Avatar
 
Join Date: May 2010
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default 340bhp Hawkeye WRX

have my car running at this power for a while now, was just wondering what mods should i do as supposrt mods to what i have already done, like should i be fitting boosy solenoids and the like??

SC36 billet turbo,
Walbro fuel pump,
full stainless steel system inc de-cat,
cold air intake,
and thats about it really apart from non engine mods.

Any suggestions wud be greatly appreciated.

cheers
Old 21 August 2011, 09:18 PM
  #2  
F1 CJE UK
Scooby Regular
iTrader: (8)
 
F1 CJE UK's Avatar
 
Join Date: Jan 2006
Location: MK
Posts: 4,931
Likes: 0
Received 0 Likes on 0 Posts
Default

6 speed box would be a good long term move
Old 21 August 2011, 09:27 PM
  #3  
etxp85
Scooby Regular
Thread Starter
 
etxp85's Avatar
 
Join Date: May 2010
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

was thinking more of engine mods, but i think the hawkeye box is good for around 400bhp, but i couldnt say for sure.
Old 21 August 2011, 09:36 PM
  #4  
addison
Scooby Regular
 
addison's Avatar
 
Join Date: Dec 2007
Posts: 569
Likes: 0
Received 0 Likes on 0 Posts
Default

Is it a 2.5 if so a VF34 would give you 340 bhp and 400 ft/lbs at 2800rev's makes a quick car

Last edited by addison; 21 August 2011 at 09:38 PM.
Old 21 August 2011, 09:41 PM
  #5  
The Pink Ninja
Scooby Regular
iTrader: (23)
 
The Pink Ninja's Avatar
 
Join Date: Apr 2008
Location: ...
Posts: 6,703
Likes: 0
Received 2 Likes on 2 Posts
Default

Its usually the torque that goes through the gearbox that does the damage especially on a 2.5 with a 5 speed, I wouldn`t push it any further is my advice,

Supporting mods would be if you dont already have them, An STI intercooler to bring temps down and a set of gauges to see whats going on and obviously brakes as the 4 pots will give brake fade early with a bit of enthusiastic driving with the power you have,

Gaz.
Old 21 August 2011, 09:43 PM
  #6  
etxp85
Scooby Regular
Thread Starter
 
etxp85's Avatar
 
Join Date: May 2010
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by addison
Is it a 2.5 if so a VF34 would give you 340 bhp and 400 ft/lbs at 2800rev's makes a quick car
i already have a sc36 billet turbo
Old 21 August 2011, 09:44 PM
  #7  
etxp85
Scooby Regular
Thread Starter
 
etxp85's Avatar
 
Join Date: May 2010
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by GAZ2293
Its usually the torque that goes through the gearbox that does the damage especially on a 2.5 with a 5 speed, I wouldn`t push it any further is my advice,

Supporting mods would be if you dont already have them, An STI intercooler to bring temps down and a set of gauges to see whats going on and obviously brakes as the 4 pots will give brake fade early with a bit of enthusiastic driving with the power you have,

Gaz.
an sti intercoller is on my list! gauges also, but i dont know which ones to get, defi is an obvious choice except for the price.
i have uprated discs and pads already so no issues there really!!

Trending Topics

Old 21 August 2011, 10:13 PM
  #8  
dunx
Scooby Senior
iTrader: (3)
 
dunx's Avatar
 
Join Date: Jun 2006
Location: Slowly rebuilding the kit of bits into a car...
Posts: 14,333
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by etxp85
was thinking more of engine mods, but i think the hawkeye box is good for around 400bhp, but i couldnt say for sure.
Wrong ! I know two people who have killed three boxes at 370-480 !

Sorry !

dunx
Old 21 August 2011, 10:46 PM
  #9  
Pramas
Scooby Regular
 
Pramas's Avatar
 
Join Date: Feb 2011
Posts: 710
Likes: 0
Received 0 Likes on 0 Posts
Default

push it over 350bhp with even greater torque which the 2.5l make on a 5 speed and your on borrowed time, as like anything some last longer than others

Last edited by Pramas; 21 August 2011 at 10:48 PM.
Old 21 August 2011, 11:16 PM
  #10  
addison
Scooby Regular
 
addison's Avatar
 
Join Date: Dec 2007
Posts: 569
Likes: 0
Received 0 Likes on 0 Posts
Default

Originally Posted by etxp85
i already have a sc36 billet turbo
What made you go for a sc36?
Old 21 August 2011, 11:19 PM
  #11  
Tomwrx
Scooby Regular
iTrader: (54)
 
Tomwrx's Avatar
 
Join Date: Jun 2009
Location: irvine,ayrshire
Posts: 3,661
Likes: 0
Received 1 Like on 1 Post
Default

mines went at 355bhp and same torque.
ive got a 6spd in mine now,
get an sti tmic, prosport gauges are the next best thing to defi's,strut brace,

i have also fitted on my hawkeye wrx whiteline front and rear arbs,droplinks and uprated bushes, h brace and alk,car feels planted although im going for coilovers,




All times are GMT +1. The time now is 06:21 PM.