Help please, i thought my rear o/s shock was gone, have got it booked in next monday to be fitted, the problem is when my lad was sitting in the rear seat and i drive over a bump the arch was banging on the tyre, if i am on my own and i go round a corner fast it hits the tyre, the problem i have is - is it because of the shocks, or is it because the 18" tyres stick out more than normal.
So my main question is is it normal to get more than 2" depression under load in the shocks? this would answer the question if its the shocks or the tyres!!!

 

looks like they need arch rolling. are they aftermarket wheels and whats the offset??

 

yes m8 they are aftermarket and are 100's the wheels have got spacers on them as well

 

Thats your problems then. Too much offset. Either get the arches rolled on inside or get slightly narrower tyres. What profile tyre you got currently?

 

they are 225 40 18's

So i take it my shocks are prob ok then, just need some std 17"?

 

What size spacers are you running and why? Is it to clear brakes? I am running 225 tyres on my 18" wheels with no issues. No spacers though.

 

not sure of size of spacers just been told by my pal when i was round his unit..

Any idea of how much a strut should compress (max load) cheers.

 

No idea. Its probably nothing to do with the shocks. With aftermarket wheels with unknown offset and wheels spacers to boot your wheels are just too wide.

 

ok just had a look, the spacers about 5mm thick, cant see why they would be there, there is loads of room round the brembos, if i remove the spacers that should remove the problem - do you think?

 

Thats what i'd do mate!

 

[SIGH]


Anybody want to buy a full set of STi (2005) Struts with springs ?


Cheers for your help m8 btw