boost pressure
14 August 2011, 02:05 PM
#1
Scooby Regular
Thread Starter
Join Date: Feb 2011
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
boost pressure
Can u tell me wot boost pressure I should b running on a 2.5 hawkeye sti
As I have put in a boost gauge and it says I am running 1.4 bar
As I know the car is standard apart from 2nd decat. Nur spec cat back and a k and n tyhoon
As I have put in a boost gauge and it says I am running 1.4 bar
As I know the car is standard apart from 2nd decat. Nur spec cat back and a k and n tyhoon
14 August 2011, 02:17 PM
#2
Scooby Regular
Join Date: Feb 2011
Posts: 710
Likes: 0
Received 0 Likes
on
0 Posts
standard boost on hawk sti from subaru are 1.04 bar ( had mapper read mine before i got the map the 1st ever time ). Id suggest yours has already had some form of mapping done to it.
1.4bar should be fine if your car has standard internals
1.4bar should be fine if your car has standard internals
14 August 2011, 04:47 PM
#7
Your car has been mapped for air filter K&N Typhoon and other mods,i would drive off the until you are car will be mapped for these mods.
K&N Typhoon are not the best solution for your Subaru..
Best bet if you are visit in your area Rolling road and ask for AFR,Det test and power run and you will see what your car will make and if has been mapped before.
Jura
K&N Typhoon are not the best solution for your Subaru..
Best bet if you are visit in your area Rolling road and ask for AFR,Det test and power run and you will see what your car will make and if has been mapped before.
Jura
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM