will bug stearing wheel fit a 98/99 type r ???
ok so got the momo today unscrewed the airbag bit inside there are two elec conections 1) yellow = same conection colour as on car and fits fine.
2) there is a black conection on wheel and a white on car very simular but cannot get to fit properly ...
have i made a fluff and and got a wheel that will not fit a 98/99 ?? the momo is from a bug so has the silver momo sign in middle as aposed to been black like the ver 5 i belive ..
can this wheel fit or do i have to send back ??
picsss
wires from car..
wires on stearing wheel

close up of wire from from stearing wheel

the plug from stearing wheel has only 1 pin but the wire / conector from car has 3 wires
heeeeeelllllllllllpppppppppp
2) there is a black conection on wheel and a white on car very simular but cannot get to fit properly ...
have i made a fluff and and got a wheel that will not fit a 98/99 ?? the momo is from a bug so has the silver momo sign in middle as aposed to been black like the ver 5 i belive ..
can this wheel fit or do i have to send back ??
picsss

wires from car..
wires on stearing wheel

close up of wire from from stearing wheel

the plug from stearing wheel has only 1 pin but the wire / conector from car has 3 wires
heeeeeelllllllllllpppppppppp
Last edited by crazyspeedfreakz; Aug 10, 2011 at 04:18 PM.
been searching for a little while cannot seem to find a threads on it..
ANYBODY HELP ME WITH THIS ?? PLEASEEE
I had to change this plug. There was a yellow with black strip wire and a yellow with red strip with the yellow plug on the end


You need to keep the original clockspring, and the horn wire plug (white) just has an earth, which plugs into the 3 wire plug


You need to keep the original clockspring, and the horn wire plug (white) just has an earth, which plugs into the 3 wire plug
Trending Topics
my conections to the airbag go straight into 1 another i dont think i need to change that my prob is the the horn wire... from the car is a 3 pin (female) and the 1 from the stearing wheel is a 4 pin plug (male) so they mismatch ..

basicly the two conectors for the horn do not fit ... may it have somthing
todo with jdm / uk models ?? .... i no it looks a close fit in the pic but the male & female points dont line up also the black wire from wheel dosent match up with black from car ... think im gonna

also was stumped as to why there are 3 wires going into the white conector from car when there is only 1 wire from horn on wheel

some 1 please .... is this a no go ... need helpppp
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
34
Nov 7, 2024 04:10 PM








