How are the panels fixed to the car?
#1
UK MY00, Turbo.
Front wing (passenger side). Is it a case of bolt on top and bottom or bolt at top and welded at the bottom? How easy is it to take one off and replace? How much of the trim is going to have to die and be replaced? Is it a bodyshop job or could a well equiped but non-professional do it?
Thanks...
Front wing (passenger side). Is it a case of bolt on top and bottom or bolt at top and welded at the bottom? How easy is it to take one off and replace? How much of the trim is going to have to die and be replaced? Is it a bodyshop job or could a well equiped but non-professional do it?
Thanks...
#2
Scooby Regular
Join Date: Nov 2001
Location: Leeds - It was 562.4bhp@28psi on Optimax, How much closer to 600 with race fuel and a bigger turbo?
Posts: 15,239
Likes: 0
Received 1 Like
on
1 Post
Its bolted on across the top under there are two bolts in where the door hinges are... one underneath the car by the sill... one or two under where bumper fits to it... and one or two behind where the headlight is... easy job to change the wing...
Just have to remove a fair bit!.
At least I dont owe you for that .NET help now!
David
Just have to remove a fair bit!.
At least I dont owe you for that .NET help now!
David
Thread
Thread Starter
Forum
Replies
Last Post
JonMc
Subaru Parts
22
06 February 2016 09:50 PM
ossett2k2
Engine Management and ECU Remapping
15
23 September 2015 09:11 AM