which eingine fits my Sti Ver3?
#1
Scooby Regular
Thread Starter
Join Date: Jan 2011
Location: Germany
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
which eingine fits my Sti Ver3?
Hi mates. I have a problem. The engine of my Impreza Sti Ver3 is defect (bottom and heads). I have looked for a new sti ver3 engine but did not found any.
What can I do now? Can i use a engine of another version? I don´t know. Maybe you can help me.
Thank You!
What can I do now? Can i use a engine of another version? I don´t know. Maybe you can help me.
Thank You!
Last edited by wimpa; 30 May 2011 at 10:56 AM.
#2
Scooby Regular
iTrader: (1)
Its only the STi Version 3~4 you can use as a direct replacement with the same internals (HF Forged Pistons and Sti heads).
What is wrong with your cylinder heads ?? If they are warped due to overheating,then they can be skimmed/machined by 0.012" (0.30mm) to reclaim them.
If you can save the heads then you could use the STi Version 5/6/7 bottom end with the appropriate head gaskets to keep the Compression Ratio correct.
Hope this helps,
Mick
What is wrong with your cylinder heads ?? If they are warped due to overheating,then they can be skimmed/machined by 0.012" (0.30mm) to reclaim them.
If you can save the heads then you could use the STi Version 5/6/7 bottom end with the appropriate head gaskets to keep the Compression Ratio correct.
Hope this helps,
Mick
#3
Scooby Regular
Thread Starter
Join Date: Jan 2011
Location: Germany
Posts: 76
Likes: 0
Received 0 Likes
on
0 Posts
One piston knocked out the valves of one cylinder. I cant use the head anymore.
Which gasket would I need if i buy the block of a ver 5,6 or 7? Where can i get new heads?
Which gasket would I need if i buy the block of a ver 5,6 or 7? Where can i get new heads?
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
33
29 August 2017 07:18 PM
Danny0608
Subaru
6
27 September 2015 02:16 PM
Danny0608
Subaru Parts
0
12 September 2015 02:59 PM