Hi guys.

Will a 3" cat back fit to a standard Down pipe or will it need a 3" de-cat down pipe.

Thanks David

 

I got a 3" middle section that i tested fitted to the standard downpipe it mated up to it. holes all lined up ok.

 

I think scoobyworld sell an adapter

 

The Revolution 3" system comes with an adapter section to fit.

 

Just fitted a 3 inch center section to the standard exhaust this afternoon.

Only problem was the length of the bolts for the front flange, flanges were different depth so needed longer bolts (or cut springs).

2000 UK Turbo

 

Does anybody know if the blitz nur will fit the stock down pipe.

 

Yes will fit,but you will need adapter if its 3"
Adapter cost £25



Jura

 

Where can i get one of these adaptors

Thanks David

 

Hi David here is it

http://www.scoobyparts.com/acatalog/...APTOR_KIT.html


Jura

 

Isnt that the wrong way round ?

it says to fit a 3" DOWNPIPE to allow it to fit to the 2.5" mid section,the o/p wants to fit a 3" MIDSECTION to a 2.5" DOWNPIPE

and the blitz system is a 2.5" midsection/downpipe flange so it mates to a standard downpipe

 

But i think will allow fit this..
if not is possible if you contact Jetex,Cobra etc. and these guys will make custom adapter(my friend have similar on his EVO from Jetex adapter)


Jura