Notices
General Technical
Sponsored by:
Sponsored by: CARiD

help and info i am stuck

Thread Tools
 
Search this Thread
 
Old Apr 28, 2011 | 06:23 PM
  #1  
P600wrx's Avatar
P600wrx
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jan 2010
Posts: 783
Likes: 0
From: wolverhampton
Default help and info i am stuck

Right guys little stuck on this one, 96 wrx,

here is what is wrong, interior light not working nor the door ajar lamp on the cluster, rear screen lamp not on either when button depressed, but here is the real fubar,
my central locking seems to have developed a strange way of working, if the ignition is on and the doors closed it works fine, if i open a door or switch ignition off then it does not work, i have checked all fuses and are fine, all i can think is the door circuit is some how affecting it, maybe a relay has lost power somewhere and is only working on an ignition feed, does anyone have a link too or a schmatic diagram to this section of imprezas i can follow before i start stripping the car, or know of a problem like this,

thanks a very puzzled mark

found 1< but any ideas the difference between a keyless entry with hook and 1 without hook??????

Last edited by P600wrx; Apr 28, 2011 at 06:33 PM.
Reply
Old Apr 28, 2011 | 06:49 PM
  #2  
alcazar's Avatar
alcazar
Scooby Regular
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: Jun 2002
Posts: 40,788
Likes: 30
From: Rl'yeh
Default

Could it be an alarm problem?

Does it show the SAME problem when ANY door is opened, or a particular one?
Reply
Old Apr 28, 2011 | 07:01 PM
  #3  
P600wrx's Avatar
P600wrx
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jan 2010
Posts: 783
Likes: 0
From: wolverhampton
Default

nothing to do with alarm bud,

and any door that is open causes problem, it has to be the interior light circuit surely, will get volt meter out tomorrow, hmm although any ideas are welcome............
Reply
Old Apr 28, 2011 | 08:54 PM
  #4  
P600wrx's Avatar
P600wrx
Thread Starter
Scooby Regular
iTrader: (1)
 
Joined: Jan 2010
Posts: 783
Likes: 0
From: wolverhampton
Default

FIXED: well somehow somewhere, the power supply to the interior light has failed causing the cdl to back track through the igniton feed, dont know why or how but i fitted a fused 3amp supply to the interior light supply and all is as it should be,

cheers
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
KAS35RSTI
Subaru
27
Nov 4, 2021 07:12 PM
SilverM3
ScoobyNet General
8
Feb 24, 2021 01:03 PM
just me
ScoobyNet General
25
Oct 29, 2015 10:32 AM
lozgti1
Non Scooby Related
8
Sep 28, 2015 03:49 AM
slimwiltaz
General Technical
4
Sep 25, 2015 10:22 PM




All times are GMT +1. The time now is 02:01 PM.