Air temp - Power FC
#6
Scooby Regular
iTrader: (3)
Join Date: Jan 2003
Location: Oss, The Netherlands
Posts: 749
Likes: 0
Received 0 Likes
on
0 Posts
UK turbo's dont have them, but you can make this work with just a bit of wiring and a aftermarket temperature sensor. (Not sure about oil or water temp, but a aftermarket ECU's temperature probe will deffo work)
Before the Syvecs I had a PowerFC, and used a Autronic temperature sender.
The sensor has 2 connecting opins, ground one (does not matter which one)
and run the second wire to the ECU.
Then it is just a matter of finding the corresponding JDM ECU pinout, and connecting the wire to the ECU pin.I just connected the ECU plugs, and shoved the wire into the correct thole in the plug, and used some hotmelt glue to fix the wire in place.
Worked perfect for 3 years.
Before the Syvecs I had a PowerFC, and used a Autronic temperature sender.
The sensor has 2 connecting opins, ground one (does not matter which one)
and run the second wire to the ECU.
Then it is just a matter of finding the corresponding JDM ECU pinout, and connecting the wire to the ECU pin.I just connected the ECU plugs, and shoved the wire into the correct thole in the plug, and used some hotmelt glue to fix the wire in place.
Worked perfect for 3 years.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Pro-Line Motorsport
Car Parts For Sale
2
29 September 2015 07:36 PM