Alignment Settings
17 April 2011, 09:43 AM
#1
Scooby Regular
Thread Starter
iTrader: (5)
Join Date: Feb 2005
Posts: 398
Likes: 0
Received 0 Likes
on
0 Posts
Alignment Settings
Does anybody have the alignment settings for fast road set up for a UK 99
16" Speedlines
Lowered 40mm on standard springs
standard drop links and roll bars
16" Speedlines
Lowered 40mm on standard springs
standard drop links and roll bars
17 April 2011, 04:53 PM
#2
As near to 0 for toe front and rear. But this is dictated by the camber to an extent.
On std struts, I think you can get -ve 1.0deg camber at the front, and -ve 1.5 at the rear. Don't really wanna go much more than -1.5 all round on the road, as your'e not cornering like a loon everywhere after all! (Compromise of cornering grip vs tyre wear)
To get -1.5 or more at the front, you'll need a set of camber bolts fitted to the struts - about £20 for the pair. You can also fit some to the rear too, if you really want more than -1.5 at the rear......
On std struts, I think you can get -ve 1.0deg camber at the front, and -ve 1.5 at the rear. Don't really wanna go much more than -1.5 all round on the road, as your'e not cornering like a loon everywhere after all! (Compromise of cornering grip vs tyre wear)
To get -1.5 or more at the front, you'll need a set of camber bolts fitted to the struts - about £20 for the pair. You can also fit some to the rear too, if you really want more than -1.5 at the rear......
Last edited by joz8968; 18 April 2011 at 12:25 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM