Wiring On Mirrors.
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: May 2009
Location: Swansea
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Wiring On Mirrors.
On my Blobeye ive had to change the mirror on the drivers side. Coming from it there is 5 wires going to a block(2 Green,Blue, Light Blue and White).
But ive noticed when ive removed the switch by the handbrake, there is 6 wires coming from it(4 Multi Colour, Red, Black). The button has the function to fold the mirrors in but the mirrors never have.
Is this the sixth wire or something else.
I guessing that the switch was put there ready to get folding mirrors in due course by the last owner. But im sure my old mirrors are pretty much the standard type.
Can anyone clear this up for me?
But ive noticed when ive removed the switch by the handbrake, there is 6 wires coming from it(4 Multi Colour, Red, Black). The button has the function to fold the mirrors in but the mirrors never have.
Is this the sixth wire or something else.
I guessing that the switch was put there ready to get folding mirrors in due course by the last owner. But im sure my old mirrors are pretty much the standard type.
Can anyone clear this up for me?
#2
Scooby Regular
iTrader: (2)
Mirror folding is two wire.
You need two extra at the switch and two extra at each mirror, which it sound like your loom already has.
The two from the switch split and two go to each mirror. Current flows in one direction to open, the other direction to close, so they don't do anything with just one wire extra.
You need two extra at the switch and two extra at each mirror, which it sound like your loom already has.
The two from the switch split and two go to each mirror. Current flows in one direction to open, the other direction to close, so they don't do anything with just one wire extra.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM