Name the part?
Could someone tell me what the part is called on the back of the head it's some sort of cover/bung that seals a metal pipe that comes off the head it's on the right hand side about half way down if your looking over the engine? Mine seems to be missing just looked at my mates and he's got a silver cover on his with some silicone hose? What's this bit called and what's it do? Thanks for your help
is it a phase 1.5 engine ie 97-98 with the coil pack in the centre of the inlet, it sounds like a bung for the recirc dv, i'm assuming your mate has an aftermarket dv & you have a standard recirc btw dv is dump valve
Trending Topics
Without it plugged, the turbo intake hose will be sucking in unmetered air (i.e. after the MAF), so resulting in higher than normal (leaned out) AFRs. Ergo, the ECU won't "know" about the extra air, so can't add fuel for it to compensate - not good!
Last edited by joz8968; Feb 27, 2011 at 12:53 PM.
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Joined: Apr 2005
Posts: 11,778
Likes: 4
From: Newcastle. 330bhp-289lb/ft @ 1bar boost - 12.4s @ 105mph
Assuming it's the same size as the Phase 1.5, then the external diameter of the pipe is 25mm.
God I've got some crap in the shed.
God I've got some crap in the shed.
At least all your parts are in a convenient shed........ Mine are all in the bath/bathroom!!! Inc. a set of 4 OEM wheels/tyres!!!

I have 12 wheels/tyres in total in my pokey l'il flat!

I have 12 wheels/tyres in total in my pokey l'il flat!
Last edited by joz8968; Feb 27, 2011 at 01:47 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
Dec 28, 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
Nov 18, 2015 07:03 AM



[/IMG]



