Rossyboy99

I need to change my brakes discs and pads but need some help first,

i have 4 pot calipers on the fronts and i'm guessing 2 pot on the rear, is that the standard uk turbo set up?

what size are the front/rear discs?

my front are vented, rear are solid if that helps at all,

also i got asked what pads i want? are there different sizes also?

finally the rear brakes have shoes inside? how do i get the disc off without bothering all that gumff inside?

ASTBURY83

No its not the standard set up aint sure wot u have, I would upgrade to sti brakes front and back but u will need calipers, discs and pads u will have a good set up then hope this helps

Rossyboy99

just want to do the change on a budget mate, i'm guessing then i have 4 pots added to the front at some point so it'll be those for front and standard rears.

Godspeed Brakes

iTrader: (259)

You need 294mm discs and 266mm rears , there is only one shape pads for the 4 pots , your rear calipers are one pot calipers , the early pads have cut outs on the ends of the pads , the later ones have lugs , check out the pad shapes here

http://www.godspeedbrakes.co.uk/~god...d_category=138

You can ring me tomorrow of you need any further info

Cheers Ian
01656 723060

alcazar

iTrader: (2)

Be careful though, my 98 car only had TWO pots on the front

Have yours got SUBARU on them in raised letters? If not, you probably have two pots.

Rossyboy99

cheers ian thats exactly what i needed, good man for the help.

Rossyboy99

alcazar, there defo 4 pots on the frontthe calipers have the subaru emblem on them.