AkCustomz

iTrader: (2)

I have a 96 sti with ej25 conversion running version 3 sti heads. The engine is all built now but i am having problems firing her up. The engine is turning over and their is fuel havn't yet checked sparked yet as this just popped into my head. I am using my old coilpacks from my ej20 v2 engine and was thinking whether they where even reaching the plugs?
Never even thought about it at the time of building it up but should i be running other coilpacks? If so can anyone tell me which ones and if you have any? as i will have them off you right away.

Thanks Alan

Parrg341

iTrader: (8)

Hi im sure if you using the standard sti heads and coilpacks they are matched as they fit the heads and changing block wont affect them.

Sounds like timing or immobiliser.

Im sure someone could help a little better.

Ross

si2000

iTrader: (8)

Im guessing you have checked that everything like crank and cam sensors are plugged in etc

AkCustomz

iTrader: (2)

Yeah im looking for a pair of cam sensors at the moment but ive check spark etc and its all good, fuel good and cams in correct order which i have made the mistake of before lol. Almost sounds like low compression. Going to try a compression test tomorrow but i really think the cam sensors might be faulty..

P1Drifter

iTrader: (7)

if you've got spark and fuel it should fire, and would indicate your sensors are working ?

scubbay

iTrader: (61)

Just had a blast this evening in a version 2 with version 3 heads and camcovers. All good to 1.6 bar