Scoobdogg

iTrader: (2)

I need to get myself a good inductiong set up. The car in question is a 98 Type r, 2.1 stroker, tdo5 20g, simtek, 740's.....most of the work that has been carried out or is getting carried out is being done whilst i am away at present so its difficult for me to keep tabs on what is what an ill be honest im not the most tech. I recently ordered a large k&n and 80mm spun trumpet from RCM thinking that this will fit my set-up but now after looking at the pictures of the where does this fit http://www.rogerclarkmotorsport.co.u...productID=1149 i think this is designed to fit the rotated turbo set-up am i correct there or is it possible to fit it to the turbo as it runs under the manifold? If so what would i need to do that? or am i better getting a different setup to fit the way my turbo is positioned? Help and advice is always appreciated.

happydude303

iTrader: (1)

you can fit this i have you just need a bit of hose made up to fit i had a pice made up from http://www.sfsperformance.co.uk/?gcl...FQ1O4QodNlWmHw it was a45 degree bend one end was to fit over the turbo indurion pipe which was about 65mm and the other end was i.e 80mm and it just fits in

happydude303

iTrader: (1)

https://www.scoobynet.com/general-te...nd-engine.html

scroll down here and you will see a picture and p.s i have fit this to the standard black turbo induction pipe