wiring up air fuel ratio sensor
17 January 2011, 02:57 PM
#1
Scooby Regular
Thread Starter
Join Date: Sep 2007
Location: manchester
Posts: 290
Likes: 0
Received 0 Likes
on
0 Posts
wiring up air fuel ratio sensor
** POSTED FROM ELECRICAL SECTION ** got a m reg 94 jap import .... someone has removed and blanked off sensor in headers, customer has supplied a universal sensor it has 3 wires .... 2 white which are for heater in sensor and 1. black which is signal to ecu....
but on car the wires are yellow with red pin stripe...white , black pin stripe and white anybody any ideas which wires go where ..
the yellow has 12v +
the white has 0.1v +
the white/black has 0.2 volt
by the way the car is running rough and popping about 4000 rpm hense fitting
but on car the wires are yellow with red pin stripe...white , black pin stripe and white anybody any ideas which wires go where ..
the yellow has 12v +
the white has 0.1v +
the white/black has 0.2 volt
by the way the car is running rough and popping about 4000 rpm hense fitting
Thread
Thread Starter
Forum
Replies
Last Post
Scott@ScoobySpares
Full Cars Breaking For Spares
61
11 January 2021 03:08 PM
Scott@ScoobySpares
Full Cars Breaking For Spares
55
05 August 2018 07:02 AM
Mattybr5@MB Developments
Full Cars Breaking For Spares
38
17 July 2016 10:43 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
20
22 October 2015 06:12 AM
oilman
Trader Announcements
15
01 October 2015 11:55 AM