Can Anyone Help
11 January 2011, 07:53 PM
#1
Scooby Newbie
Thread Starter
Join Date: Jan 2011
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Can Anyone Help
Iam new to this and to scobbies too so here goes.
I have a 1994 impresza wrx but she is not very well.
She was running fine when i parked her up but when my wife went to go to work that evening the car had cooled down by this time she had produced a misfire anything above 2500rpm (the car not the Wife lol)
It has an f c command stand alone ecu and a decat 3.5 inch exhaust.
I have changed the plugs and coil packs (expensive or what) but this did not cure the problem.
Does anyone have advice.
I have a 1994 impresza wrx but she is not very well.
She was running fine when i parked her up but when my wife went to go to work that evening the car had cooled down by this time she had produced a misfire anything above 2500rpm (the car not the Wife lol)
It has an f c command stand alone ecu and a decat 3.5 inch exhaust.
I have changed the plugs and coil packs (expensive or what) but this did not cure the problem.
Does anyone have advice.
11 January 2011, 08:06 PM
#2
Former Sponsor
iTrader: (4)
Join Date: Jan 2001
Location: ECU Mapping - www.JollyGreenMonster.co.uk
Posts: 16,548
Likes: 0
Received 2 Likes
on
2 Posts
Unusual.. anyway the commander has been altered by accident?
Maybe time to let someone look at the map on it / diagnose the issue.
Thr powerfc doesn't worry about things that on the standard ecu could cause a misfire or cut etc.. so most likely fuelling or spark related, so the plugs and coils a good call.
Simon
Maybe time to let someone look at the map on it / diagnose the issue.
Thr powerfc doesn't worry about things that on the standard ecu could cause a misfire or cut etc.. so most likely fuelling or spark related, so the plugs and coils a good call.
Simon