Inlet manifold removal
#1
Scooby Regular
Thread Starter
iTrader: (2)
Join Date: Dec 2007
Location: Horsham, Sussex
Posts: 784
Likes: 0
Received 0 Likes
on
0 Posts
Inlet manifold removal
V5 STI, the red paint on the manifold has flaked off.
How hard is it to get the inlet manifold off with the engine still in the car?
What else needs to be removed?
Cheers
How hard is it to get the inlet manifold off with the engine still in the car?
What else needs to be removed?
Cheers
#2
Scooby Regular
AC compressor, pas pump assembly, alternator, 3 wiring harness connectors ( 2 behind battery & 1 on the o/s inner wing near the airbox) fuel lines, vacuum line to brake servo, intercooler & unplug cam sensor, crank sensor, coolant temp sensor & pas sensor. Then header tank & undo the turbo inlet jubilee clip then 8 bolts for the inlet manifold & lift off over the water pipe that feeds from the bottom of the header tank to the cross over pipe. If you have some mechanical knowledge it should take you around an hour or so.
Dan
Dan
Thread
Thread Starter
Forum
Replies
Last Post
Mattybr5@MB Developments
Full Cars Breaking For Spares
28
28 December 2015 11:07 PM
Mattybr5@MB Developments
Full Cars Breaking For Spares
12
18 November 2015 07:03 AM